• Assembly• Operation• Maintenance• Repair PartsCAUTION:Read Rules forSafe Operationand InstructionsCarefullyOWNERSMANUAL45 GALLON ATV SPRAYERModel No
10MAINTENANCE1. Do not store sprayer with any solution left in tank.2. Periodically clean the strainer in the end of the intake hose at the bottom o
11 10 .25 36.8 18.4 12.3 9.2 7.4 4.9 3.7 10 .25 36.8 18.4 12.3 9.2 7.4 4.9 3.7 10 .25 36.8 18.4 12.3 9.2 7.4 4.9
12REPAIR PARTS FOR 45 GALLON SPRAYER MODEL 45-03252AA1234456611121314151618192020192121222323232323232425262627282930303123233132333333333435363738 3
13 REF. PART QTY. DESCRIPTION REF. PART QTY. DESCRIPTION REF. PART QTY. DESCRIPTION REF. PART QTY. DESCRIPTION NO. NO. NO.
14NOTES
NOTES
16REPAIR PARTSAgri-Fab, Inc.303 West RaymondSullivan, IL. 61951217-728-8388www.agri-fab.comthe fastest way to purchase partswww.speedepart.com© 2004 A
2RULES FOR SAFE OPERATIONAny power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment.
3 KEY QTY. DESCRIPTION KEY QTY. DESCRIPTION KEY QTY. DESCRIPTION KEY QTY. DESCRIPTIONFULL SIZE HARDWARE CHART KEY QTY. DESCRIPTION KEY QTY.
4ASSEMBLY INSTRUCTIONSFIGURE 34. Assemble the tongue to the bottom of the front frame angle and the frame strap using four 3/8" x 1" carria
5FIGURE 56. Assemble a wheel spacer, a 1" fl at washer, a wheel (valve stem facing out) and another 1" fl at washer onto the axle as s
611. Attach the tank to the frame using six 1/2" spacers with six 3/8" x 1-1/4" hex bolts, 3/8" lock washers and 3/8" fl at w
7FIGURE 1224. Tie the hoses to the front of the boom using four nylon ties per side as shown in the front view in fi gure 13. After tightening, cut ex
8FIGURE 17FIGURE 1629. Connect the boom connecting hose and the return (bypass) hose to the "Y" valve fi tting, placing a hose gasket
9USING THE SPRAYER1. Determine the application rate (gallons per 1,000 sq. feet or gallons per acre) based on the chemical manufacture
Comments to this Manuals