Agri-Fab 45-02931 Owner's Manual download pdf (Page 5)

FIGURE 7

10. Assemble the boom mount bracket to the rear of

the frame tubes using two 5/16" x 2" hex bolts and

5/16" hex nuts. See figure 5.

FIGURE 5 REAR VIEW

11. Assemble the boom bars to the boom mount

bracket using two 5/16" x 1-1/4" carriage bolts,

tooth lock washers (between the bar and bracket),

5/16" flat washers and knobs. The boom connect-

ing hose should extend upward. See figure 6.

NOTE: Make sure the nozzles are adjusted so that

the openings face straight down when the boom

bar is in the horizontal operating position.

FIGURE 6

5/16" HEX NUT

5/16" x 2"

HEX BOLT

CARRIAGE BOLT

5/16" x 1-1/4"

KNOB

5/16" FLAT

WASHER

(TOOTH LOCK)

BOOM BAR



BOOM CONNECTING HOSE

SPRAY GUN

CLIP (LARGE)

SPRAY GUN

CLIP (SMALL)

#10 x 1/2"

SCREW

#10 LOCK

WASHER

12. Assemble the large and small spray gun clips to the

side of the tank using two #10 x 1/2" screws and #10

lock washers. See figure 7.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Agri-Fab 45-02931 Owner's Manual Page 5